Shareware Super Platinum 8/Shareware Super Platinum 8.iso/mac/DATABASE/TECH91.ZIP;1/TI581.ASC

Text File | 1991-08-26 | 4.9 KB | 199 lines

  PRODUCT  :  Paradox                                NUMBER  :  581
  VERSION  :  3.xx
       OS  :  DOS
     DATE  :  August 26, 1991                          PAGE  :  1/3

    TITLE  :  Installing Paradox on a LANtastic Network




  These notes are general tips on using Borland's Paradox with
  Artisoft's Lantastic Network.  Borland has not done extensive
  testing on Lantastic.  However, a number of users are
  successfully running Paradox on Lantastic Networks.

  Before you install Paradox on a LANtastic network, you must of
  course have the LANtastic network properly installed.  That
  should be covered in your LANtastic manuals.  Paradox will be
  installed on a server, which should have a C: drive.  Finally,
  LANtastic should be running and you should be logged in as the
  "manager" (a.k.a. the network supervisor).

  To get LANtastic ready for Paradox installation, you must create
  a directory to house your "PARADOX.NET" file.  This directory
  will also be the shared data directory, and should be called

                      \PDOXDATA

  Since \PDOXDATA will be your shared directory, all users should
  have all rights to this directory.

  To create \PDOXDATA, go to your root directory on your C: drive;
  then type MD PDOXDATA.

  You now have a \PDOXDATA directory.

  To get LANtastic to work properly with Paradox, you must do the
  following:

  1. Assuming that you're logged in as the manager and are at the
  DOS prompt, load the NET_MGR.EXE program supplied by LANtastic.
  This program will allow you to map a share-name to the
  C:\PDOXDATA directory.

  2. When the NET_MGR loads, choose the "Network access
  information" choice from the menu.  You will then get a list of
  your current share-names and directories to which they are
  linked.

  3. Press the [Ins] key on your keyboard to add a new share-name.
  You will then be prompted for the "...name of the link directory
  of @Device."














  PRODUCT  :  Paradox                                NUMBER  :  581
  VERSION  :  3.xx
       OS  :  DOS
     DATE  :  August 26, 1991                          PAGE  :  2/3

    TITLE  :  Installing Paradox on a LANtastic Network




  4. Type in PDOXDATA and press [Enter].  You will then be returned
  to the list of current share-names.

  5. Select the PDOXDATA choice and press [Enter].  You will again
  get a menu of choices, of which one will be "Link
  path."

  6. Choose this option and type in C:\PDOXDATA; press [Enter].
  Now press [Esc] until you are back at the DOS prompt.

  Now you need to make some minor changes to your AUTOEXEC.BAT.
  Using a text editor (edlin or an equivalent), add the following
  line to your AUTOEXEC.BAT:

            NET USE E: \\SERVER1\PDOXDATA

  NOTE:  You must place the name you gave to your file server when
  you installed LANtastic in place of "SERVER1."

  Now install Paradox according to the directions in the Paradox
  manuals:

  1. Log onto the C: drive of the file server as manager.  (Make
  sure you are in the root directory).

  2. Place your "Installation/Sample Tables" disk into A: drive;
  type A:INSTALL.

  3. When Paradox asks you if you are installing on a network,
  answer YES.

  4. Choose OTHER (number 7) for network type.

  5. Type in E: for location of your network control file.

  6. Continue with the installation as instructed by the Paradox
  manuals.

  Once you have finished installing Paradox, go to the \PDOX35 (or,
  if you are installing Paradox 3, to \PARADOX3) directory and use
  the DOS ATTRIB command to make all files except PARADOX.SOM (or
  PARADOX3.SOM if you are installing Paradox 3) read-only:














  PRODUCT  :  Paradox                                NUMBER  :  581
  VERSION  :  3.xx
       OS  :  DOS
     DATE  :  August 26, 1991                          PAGE  :  3/3

    TITLE  :  Installing Paradox on a LANtastic Network




  1. Type ATTRIB +R *.*

  2. If you are installing Paradox 3.5, type ATTRIB -R PARADOX.SOM;
  if you are installing Paradox 3.0, type ATTRIB -R PARADOX3.SOM.

  Finally, when you run Paradox, load it with the -SHARE option:
  type PARADOX -SHARE (if you are using Paradox 3, PARADOX3 -
  SHARE).  This lets Paradox know that you want it to treat the
  local (C:) drive as a network drive.  This is necessary, since
  this is a non-dedicated network.  Be sure to play the CUSTOM
  script for each user to specify their username and the location
  of their private directory.

  Special attention should be given the Paradox Network
  Administrator's Guide.  The first two chapters of this guide are
  critical to Paradox use on any network.  Also of importance is
  the chapter titled "Configuration", and the "Additional Networks"
  subsection of the "Other Networks" chapter.